Sash Lock Door Handles
If you want to enhance the security of your home, without compromising the aesthetics, choose door handles with sash lock. They can be used with mortice latches or sash lock, and can be used in conjunction with a night latch to add security for doors that are internal.
These handles are a combination of the lever and the handle that is mounted on backplate. They can be used with three or five-lever mortice locks. They can be combined with tubes latches.
Lever Lock Handles
There are many types of lever handles to match any style. Rustic lever handles work well with farmhouse or ranch-style decoration and are also very popular in modern homes. Classic lever handles are round or spherical, and are easy to hold. They are easy to use, inexpensive and fit in with any home decor. Select polished or satin nickel chrome handles for a classy appearance. These finishes are easy to clean and are durable. Other options include antique bronze and polished brass. Many handles feature decorative designs, like amber worm-eyes or long-horned cyrstals. Some levers have pins, stars or any other design molded into the bottom.
To change the lever lock door handles first ensure you have the right screwdriver or other tool to take them apart. You might require an awl or nail depending on the design and model. Some lever handles feature a small notch or hole on the opposite side of the base which can be used to open it.
Follow the manufacturer's instructions for removing your existing handles when you have the right tool. You'll need to verify the size of the spindle of your new lever handle. Doors that are in use might have been morticed for previous latches and locks which requires a specific spindle. Most lever handle manufacturers offer the same standard door spindle size for handle.
If you are replacing a sash lock door handle the old handle should be removed and the tubular latch bolt, which is within the door, needs to be removed from the strike plate that is in the door frame. The latch bolt needs to be inserted into an opening in the frame of the door and then connected to the strike plate.
It is crucial to remember that when you install a new lever handle all handles that are compliant with the ADA (Americans with Disabilities Act), are designed to operate with a hand. The user shouldn't be required to grip tightly or twist their wrists. In order to comply with ADA standards for compliance, the lever door handle cannot be operated by using fingers and thumbs or the entire hand.
Sash Lock Handles
The primary function of sash locks is to seal the door by pulling the sashes moving tightly. This stops drafts from entering the room and helps to maintain interior home temperatures, saving energy bills throughout the year. They also work well for doors that don't require the security of keys for locking systems.
Mortice sashlocks are locks that combine deadbolt and latch in one case. They are installed into the door's materials. They are often used in conjunction with a set of door handles and are available in a range of choices.
The lever lock handle is operated by a lever that has a hole cut in the backplate below. This allows a key inserted into the mortice sash to operate the lever. It's most commonly used on doors that are not locked such as dining rooms and living rooms however, it can also be used with a tubular latch on an internal door that is more secure.
They are designed to hold the sash in place at several points, and include hooks that fit inside the keeper. They are available in a variety of styles and designs that can be fitted into various window types, such as sliding or hinged casement windows. Some are made of cast aluminium, while others are made are made from brass or even wrought iron. These are available in various colors to match other components of door furniture like escutcheons, which secure the keyhole.
3 lever sash lock handles can be used on doors inside but not external ones, as they don't offer the level of security required by insurance companies. They also have a lower resistance to forced entry, which makes them more vulnerable than their certified 5 lever counterparts.
A door sash lock that has five levers is a better choice for doors that are outside because it offers higher levels of protection against forced entry and is more difficult to pick or bypass. The locks are a revolutionary design that has been tested and certified to meet the strict building, fire and disability regulations.
The first step to replacing the handle on a sash lock is to remove the old fastener by removing the screws from each end. Make sure you have a screwdriver on hand and carefully separate the parts to avoid damage. Use a pencil to mark where the screw holes are to ensure that you place the new fastener properly when it comes time to install. Clear away any dust or flecks of paint, and then screw the new fastener in place. Test the handle to ensure it functions properly and creates an airtight seal.
Tubular Latch Handles
The tubular latch is an internal latch that is operated by turning the handle. It is designed to latch the door shut however, it doesn't lock the door like mortice locks do. They are typically used on doors that are internal and there is no need for locking. double glazed sash window can be equipped with lever or knob handles.
There are a variety of sizes of tubular latches available. The sizes vary from basic to the expensive architectural. The size of the door depends on its use and whether it is equipped with a lock. For instance, a bathroom door may require a thumbturn and release mechanism in the event of an emergency, so you'll require a lockable latch.
Choosing the right latch also is dependent on the backset measurement of your door. You will need to choose the latch with a backset measurement that is equal to the distance between the edge and the center of the door's hole to accommodate the handle rose/knob. This will ensure your handle/door knobs are able to operate the latch smoothly.
If you are installing a sprung or unsprung door knob or lever, then it is important to choose a sturdy tubular latch that has a double sprung follower and tongue. This will give a smooth action for the latch and keep it from becoming sluggish or unresponsive with regular use.
Once you have selected the correct latch for your needs, the next step is to fit it on the door. First, ensure that the latch is level with the top of the door frame or casing by taking measurements and marking the position of the latch plate, then drilling holes for it. Using a countersink drill bit will help to create the proper recess for it to sit comfortably in.
Once the latch is secure Once it is in place, you can screw it to the door. Before installing your door handles or locks it is essential to make sure that the latch functions properly. To check this, open and close the door several times. If it's not working correctly Try lubricating the door using WD40. Then, try it again. If you continue to experience problems, it may be necessary to call a professional installer or locksmith.
Keyhole Handles
Keyhole handles are fitted with the tubular latch installed in the door to let it open and close it. The handle engages the latch when it is pushed down and releases it when pulled up. These handles are usually used on interior doors, such as those in living rooms and dining rooms. However, they can be fitted to front door if paired with a nightlatch.
Door knobs are a modern type of handle that combines spring levers and handles on a round or square fixing rose, with a matching thumb turn or escutcheon. They are available in a variety of styles and finishes to suit the doors of your home. They are able to be used with Euro cylinders or multipoint locking systems to provide additional security. This is accomplished through a variety of points of locking along the door's height. It is also necessary to have doors with handles that are compatible and have the right lock centre dimensions to accommodate the barrel of the cylinder.
A keyhole escutcheon covers the keyhole on the door to hide it and give the handle a sleek appearance. They are available in either a screw-on or pop-on design, and in a variety finishes to match your door handle. A recessed escutcheon that is affixed to the edge of the door to conceal the keyhole further and give it a modern look, is also used.
Certain handles are compatible with Euro-cylinder locks. These handles are suitable to secure uPVC door and require handles that have the Euro cylinder hole as well as screw holes in the backplate. These handles may also require a Euro-cylinder escutcheon or a standard escutcheon depending on the purpose for which they are used.
Whether you choose a mortice lock or a sash lock, or a tubular latch for your door, it's important to understand the different features of each and the requirements they must meet to work with other components of your uPVC door system. You will need to take into consideration the door's thickness and the door hinges, the frame reinforcements, the size of the backplate to the handle, the lock's centre dimensions, and the screw centres on the cylinder.